| |
IPAK continues to source new materials for the ever changing packaging market. Our materials list includes the core products for our fabrication business. We also stock a variety of these materials in large quantities within our warehouse, which provides a shorter lead time for most applications.
Crosslink
Crosslink is most often used when scratch proof packaging is required and meets Class "A" surface requirements. We currently stock Crosslink in densities of 2#, 4#, 6#, and 8#, with a standard sheet size of 48" x 72". Crosslink is excellent for Returnable Packaging applications and Automotive Dunnage Racks, and can be purchased in buns, sheets, or fabricated parts. |
|
 |
| |
|
|
 |
|
Polyethylene
Polyethylene is great for a broad range of packaging applications requiring protection. We currently stock Polyethylene in densities of 1.2#, 1.7#, 2.2#, 4#, 6#, and 9#, with standard sheet sizes of 24" x 108" and 48" x 108", depending on the density of the foam. We also stock low abrasion Polyethylene in a 1.9# density. Polyethylene may be purchased in full sheets, skived sheets, or cut parts. |
| |
|
|
Plastic Corrugated
Plastic Corrugated is great for totes and dividers. We currently stock sheets in thickness of 2mm, 4mm, 5mm, 6mm, and 10mm, with a standard sheet size of 48" x 96". We can glue slotted foam to plastic for parts trays, make divider cells for plastic totes, and can also sell full or cut sheets. IPAK also stocks Plastic Corrugated with spunguard in 2mm and 4mm thickness. Spunguard enables Plastic Corrugated to meet Class "A" surface requirements. |
|
 |
| |
|
|
 |
|
Rubber
Rubber is most often used in Automotive Dunnage Racks. Rubber is available in sheets and rolls, or masticated rubber. Masticated rubber is most often used as a vapor or wind barrier on car and truck windshields. Rubber can be purchased in sheets, rolls, cut parts, or can be molded into shapes. |
| |
|
|
Plastic Lumber
Plastic Lumber is excellent material for heavy parts that don't require cushioning. Stock is available in 1' x 6', 2' x 4', and 2' x 6' black boards. Additional colors are available for special ordering. Plastic Lumber is typically used in Automotive Dunnage Rack applications and is lower cost than HDPE or UHMW. It can be purchased in slotted parts, cut parts, or full boards. |
|
|
| |
|
|
|
|
HDPE/UHMW
HDPE and UHMW are primarily used in Automotive Dunnage Racks. We currently stock 48" x 96" sheets of HDPE in white or black. UHMW is also available in 48" x 96" sheets in white or black. HDPE and UHMW can be purchased in sheets or routed parts. |
|
|
